How to Preventing Caking from the NPK Fertilizer Production Process

fertilizer granulator Nov 27, 2019

NPK compound fertilizer is prone to cake because of its strength, moisture content, storage and so on. This article will introduce how to prevent caking from the process operation of NPK fertilizer production process.

NPK fertilizer production equipment produce products with smooth and uniform particles

Non-uniform particles, too many fine particles, non-smooth fertilizer, the compressive resistance, wear resistance is also poor, easy to be compressed and deformed in storage and transportation. The contact area between particles increase, which is easy to agglomerate. In order to produce products with uniform and smooth particle size, appropriate fertilizer granulator machine should be selected. Disc granulator and rotary drum granulator can produce moderate size particles and meet the requirements. If there is a higher requirement for the shape of the particles, it can also be combined with the ball shaping machine to polish the particles to ensure that the shape is qualified.

Strengthening the control of screening machine

In order to ensure the consistency of particle size and reduce the caking of powder, the product needs to be screened. According to the particle size of the product, different screens can be selected, and secondary screening can be selected in the process. Pay attention to the material screening in production, timely clean the screen.

Dryer reduces product water content

NPK compound fertilizer has a high water content, which will lead to salt reaction and cause hardening. The higher the water content, the easier the particles to agglomerate. Therefore, the NPK compound fertilizer production line must use a dryer to reduce the moisture content to the allowable range.

After the particle is dried by the dryer, the temperature is higher and the hygroscopicity effect will appear, so it needs to be cooled. The cooler reduces the material temperature to room temperature, and the product can be saved.

Coating treatment is used in NPK fertilizer production process

Choose the suitable material and use the coating machine to coat the particles. At the same time, pay attention to the amount of wrapping agent added. The amount of wrapping agent added is small, the particles are not wrapped completely, the effect is poor; the amount of adding is large, the wrapping oil will infiltrate into the inside of the NPK fertilizer, and the product is easy to cake.

Application of compost turner machine in organic fertilizer production line

fertilizer granulator Nov 25, 2019

As a new type of compost turner machine, Double-screws Turning Machine is widely used in animal manure organic fertilizer production and bio-organic fertilizer production. It is the core equipment of aerobic dynamic composting, and it is based on the organic Fertilizer manufacturing process and NPK fertilizer production machinery equipment family. The unique mechanical design and practical mechanical properties are rapidly multiplying, and it is the best substitute for replacing the manual and forklift materials. It is the mainstream product of the pre-fermentation application of organic fertilizer production line and biofertilizer project.

The Double-screws Turning Machine comprises a traverse device, a traveling device and a tumbling device, wherein the tumbling device comprises two reducers fixed to the frame, a screw shaft connected to the respective reducer via a coupling member and fixed with a spiral blade. When the device is walking on a specific track, the screw shaft will no longer work, and the screw shaft will automatically rotate to move against the work when walking to the effective work surface. The fermentation rate is increased, the compost is rapidly decomposed, the odor is prevented from being generated, and the fermentation time is shortened.

Double-screws Turning Machine performance characteristics:

1. Fully stir the doping to make the material meet the granulation demand quickly.
2. Due to the large stacking force, the material is supplemented with more fresh air, which helps the aerobic microbial fermentation to heat up, and constitutes a process of high-temperature exchange, which helps all kinds of beneficial micro-bacteria to develop and multiply in the temperature range where it adapts.
3. The turner system can process the material into small clumps, making the thick and dense material pile loose and elastic, and forming a suitable porosity.
4. After the raw materials are turned over and fermented, there is certain water content. The consumption of raw materials by a large amount of microorganisms generated after turning over the piles will also release the water in the carrier. Therefore, as the fertilizer process reduces water, in addition to the evaporation of the heat transfer composition, the turning machine flips the raw materials to form a forced water vapor volatilization.
5. Achieve special requirements for the composting process. For example, the breaking of the raw material, the shape of the raw material pile or the quantitative shift of the raw material is achieved. As one of the important equipment in the fermentation equipment and organic fertilizer production process, the turner has been at the forefront of the development of the times, making great contributions to the organic fertilizer production line and biofertilizer project.

More message about compost turner machine: What is the reason that the compost turner machine is used for manure composting?

Bio-organic fertilizer production line

fertilizer granulator Nov 25, 2019

The development of the industrial age has made great contributions to agriculture in fertilizers, especially organic fertilizers, which are produced. Now the production of bio-organic fertilizers has been mechanized, scaled and integrated, and can provide perfect fertilizer production system, let’s go into the process of biofertilizer project.

The production of bio-organic fertilizer should be determined according to the functional special effects of organic fertilizer. Then the workers first pulverize various raw materials into a certain fineness of organic materials, and mix them according to the formula in the mixer. In this process, a key step is a proportional addition of a kind of “bio-fermenting agent”, which is mixed into the fermentation tank. Because of the deep-cell aerobic fermentation, the floor space is small, the fermentation process does not require labor, and the fermentation cost is greatly saved. Because of the mechanized production, so the fermentation is uniform, no dead angle, and the product quality of the organic fertilizer is ensured from the process. After one night, the temperature of the input raw materials rose quickly, reaching a maximum of 70 degrees.

At this time, the staff could use the compost turning machine and turn on the air blowing equipment. After the end of the dumping, the end of the pool was fermented. The finished product, the new raw materials can enter the fermentation tank, and then repeat.

After the fermentation of the raw material is finished, the following operations can be carried out, including pulverizing the large-sized fertilizer therein, and then uniformly stirring, and then granulating the fertilizer granules by using a fertilizer granulator machine, followed by drying, cooling, sieving and packaging. The final product is put into storage and can be sold at any time.

Understanding the production process of bio-organic fertilizers has a very important role for farmers to purchase fertilizers in the future. Our company produces all kinds of organic fertilizer equipment, and can also help design organic fertilizer production lines. Welcome friends from all walks of life to visit our factory for cooperation.

You can see another article about organic fertilizer production line:Cow manure organic fertilizer production line

Economic Benefit of Producing Slow-acting NPK Complex Fertilizer

fertilizer granulator Nov 25, 2019

Because of the low utilization rate of chemical fertilizer, people try to make a slow-release and high-utilization fertilizer to meet the demand of nitrogen in different growth stages of crops, reduce the loss of nitrogen leaching and volatilization, reduce the fixation of phosphorus and potassium fertilizers in the soil, so that the fertilizer can supply nutrients according to the requirement of crop fertilizer. The available CaO, MgO, SiO 2 and various trace elements in fertilizers are also good soil amendments. The coated NPK fertilizer manufacturing process can produce suitable fertilizer products.

Slow release coated fertilizer manufacturing process

According to the sustainable development of agriculture and the demand of improving fertilizer utilization rate, Zhengzhou Tianci Fertilizer Machine Manufacturer has developed a slow-acting, high-utility coated complex fertilizer manufacturing process. The fertilizer manufacturing process is based on the instant granular fertilizer as the core, one or more slow-release plant nutrients as the coating, inorganic acid complex, slow solvent and other binders to wrap water-soluble fertilizer, forming a complex fertilizer with both quick-acting and slow-acting components. We provide fertilizer manufacturing process including fertilizer granulator machine, pulverizer, rotary dryers, coolers, drum screening machines, coating machines, packing machines and other equipment. The whole set of fertilizer production equipment can complete the processing and coating of the particles of the complex fertilizer, so that the fertilizer has high utilization rate in the soil.

Benefits of NPK Fertilizer Production Process

In the process of fertilizer production, the structure and composition of cladding layer can be adjusted to control the release rate of nutrients so as to reduce leaching loss and improve the utilization rate of fertilizers. This fertilizer product not only has the characteristics of slowly releasing nutrients, but also can meet the needs of nutrients for the whole growth period of crops and the ratio of nutrient utilization rate by one basal application. Conventional quick-acting fertilizer increased by 10-30 percentage points, the utilization rate of nitrogen fertilizer could reach 50%-70%, and the amount of fertilizer used could be reduced by 10%-40%. Due to the remarkable economic and social benefits of slow-acting and high-utilization wrapped complex fertilizer, and in line with the direction of fertilizer development, it is worth vigorously promoting.

Detailed analysis of process flow of NPK fertilizer production line

fertilizer granulator Nov 23, 2019

The NPK compound fertilizer production line is a comprehensive and scientific compound fertilizer production flow line, which plays an extremely important role for the user’s own production demand, cost control and economic benefit improvement. Generally speaking, the NPK fertilizer production line mainly includes raw material distribution, mixing and agitation, material pulverization, granulation and discharge, primary classification, material drying, secondary grading, finished product coating and packing etc., through effective process control and material selection, Comprehensively grasping the required material targets, the production and use of compound fertilizers have achieved the desired results.

Especially with the grasp, refinement and classification of the concept of ecological planting, green planting, resource utilization and recycling, the demand and demand level of the NPK compound fertilizer production line have been maximized. Moreover, as the technology continues to mature and continue to advance, the production processes of each branch are refined and subdivided. For example, for raw material ingredients, the industry generally adopts the ratio of urea, ammonium chloride, ammonium phosphate and ammonium nitrate, and is equipped according to a certain proportion, and also needs to have the conditions of the local soil itself. For example, there is also a great demand for material granulation. Before the material is fed into the fertilizer granulator machine for granulation, the material should be uniformly stirred, pulverized uniformly, and the overall shape is good, and this step is in the process of the NPK fertilizer production. It is a must and the most important part.

As a leading fertilizer machine manufacturer in China, we can produce different kinds of fertilizer granulator machine for the fertilizer manufacturing process, welcome to inquiry.

For the optimization, adjustment and upgrading of the NPK compound fertilizer production line, as well as the control and scientific management of the entire assembly line operation; it has played a positive role in saving manpower, reducing costs, long-term production and profit improvement.

The working principle of the disc granulator in the fertilizer production line

fertilizer granulator Nov 19, 2019

The disc granulator machine is mainly used in the NPK fertilizer production line and organic fertilizer production line to produce various granular products; it’s also used in pharmaceutical products, fertilizers, feeds, etc. Adopting the overall arc structure, the granulation rate can reach above 93%. The granulation tray has three discharge ports, which facilitates intermittent production operations, greatly reduces labor intensity and improves labor efficiency.

Disc fertilizer granulator machine working principle:
The raw meal powder is uniformly wetted by the atomized water in the mixer to form a spherical core having a uniform particle size, and then fed into a ball plate for ball formation. The moisture of the ball should be controlled at 12-14%. Most of the water should be added in the twin-shaft mixer. Only a small amount of supplementary water is added to the ball plate, and the amount of water added is controlled to be about 0 to 3%. The dry powder granulation is directly added to the ball-forming plate, and the proper amount of water is sprayed. The raw material nucleus enters the spherical disk and is subjected to centrifugal force, friction and gravity in the disk, and moves along the parabola. Due to the cohesiveness and plasticity of the material, the cores are bonded to each other and gradually grow up during the movement. When the inclination angle of the ball disc, the height of the disc edge, the rotation speed and the moisture are constant, the balls of different particle sizes roll downward from the edge of the disc at different disengagement angles due to different gravity. During the continuous rolling process, the ball continuously discharges the water in the ball out of the surface. Due to the cohesiveness of the material and the natural volatilization of the surface liquid film, the ball has certain strength, and then the disk is rotated with the tilting of the disk. The sides are discharged out of the pan.

Disc granulator performance advantages:
1. The raw materials are suitable for a wide range of applications. They can be used for granulation of various raw materials such as compound fertilizer, medicine, chemical feed, coal, metallurgy, etc., and can produce various concentrations and various types (including organic fertilizer, inorganic fertilizer, and magnetic fertilizer etc.) of compound fertilizer.
2. The disc granulator is light in weight, low in height, and flexible in process;
3. The machine has simple structure, convenient adjustment and superior performance.
4. The use of unique unpowered combination scraper integration reduces auxiliary power consumption.

5, high ball formation rate, large rounded particle strength, intuitive operation, easy maintenance and so on.

Fertilizer granulator machine is the core equipment for fertilizer manufacturing process. As one of leading fertilizer machine manufacturers in China, in addition to the disc granulator, we also produce other types of fertilizer granulator machines, and other equipment such as compost turning machines, mixer machine, crusher machine, etc.

Organic fertilizer production process and equipment

fertilizer granulator Nov 14, 2019

Bio-organic fertilizer refers to a kind of fertilizer with microbial fertilizer and organic fertilizer effect, which is composed of animal manure as the main raw material, inoculated with microbial compound microbial agent, fermented and decomposed to completely kill pathogens, insects and eggs, etc. Biofertilizers generally contain a large number of elements such as nitrogen, phosphorus and potassium, and trace elements such as calcium, magnesium, sulfur, iron and boron, as well as a large number of organic and humic acid substances, so that the fertilizer supply is balanced. The bio-organic fertilizer production line processes the fermented materials into the final organic fertilizer.

Raw materials for organic fertilizer production equipment

The main raw materials for biofertilizer production are livestock manure, crop straw and other agricultural wastes.

Mixed ingredients for organic fertilizer production

The source of raw materials, fermentation methods and equipment are different, and the ingredients are different. The specific formula depends on the source of organic materials. The general principle of proportioning is that the content of organic matter in the total material should be more than 30% (50% – 70% is the best), the ratio of carbon to nitrogen (15:1) – (20:1), the pH value should be 6-7.5, the moisture content should be about 50%, and the water content should be adjusted to 50% – 70% when inoculated.

Fermented maturity

It can be stacked flat or fermented in a fermentation tank. Fermentation tanks are usually placed in closed or semi-closed fermentation chambers. The effect is better than that on flat ground. It needs to be turned periodically by the fertilizer turner machine every three days. After 25-30 days of fermentation, the temperature gradually decreases from 70-80℃ to stable, and the decomposition is completed.

Organic fertilizer production equipment and process flow

Crushing and mixing pretreatment

Crushing equipment: Half-wet Material Crusher

The machine is mainly used to crush materials of biological fermentation organic fertilizer with moisture of 25%~50%. Crushing granule size meets the requirements of granulation, and also adjusted based on user need within a certain range. Have good effect on grinding the glass brick, ceramics and broken stone such kinds of hard matter from the city life garbage organic fertilizer.

Mixing equipment: Horizontal Mixer

The mixer machine is mainly used for mixing raw material in batches, material can be fully mixed. High mixing rate, less residual suitable for feed, concentrated feed, premix additives mixing.

Granulating equipment

After composting, the materials need to be granulated so that they have a certain strength and shape before they can be used as organic fertilizer. Granulation is a key step in bio-organic fertilizer production. There are many kinds of granulator for biofertilizer. According to the structure of granulator, the aggregate method can be divided into disc granulator, drum granulator, new type organic fertilizer granulator. According to the position of pressing roller, the extrusion method can be divided into double roller press granulator, flat-die granulator and ring-die granulator.

Disc Fertilizer Granulator: Disc granulator is widely used, less coarse particles are generated, the granulation rate is greater than 90%, but the powder fineness requirements are high.

Rotary Drum Granulator: It is suitable for hot and cold granulation and high, medium and low concentrations of mass production of compound fertilizer.

New Type Organic Fertilizer Granulator: It is used for making granulation of organic matter after fermentation, is the newest technology products by our years of research experience.

Fertilizer Roller Extrusion Granulator: Roller granulator machine have two shaft with one fixed and the other can move, which can adjust the distance between the two shafts.the materials will be extrude between the shafts. Materials are granulated at room temperature, and there is no drying process, more energy-saving and cost-reducing.

Flat Die Pelleting Machine: It no need to dry and crush the raw materials before granulation. It can direct burdening to work out cylindrical grain, and save a lot of energy.

Screening equipment

Drum Screener Machine: There are some differences in particle sizes of the particles exported from the pelletizing and forming system, which requires sieving and grading. Drum Screener machine has the advantages of low vibration, low noise and convenient screen change. The production line is equipped with automatic feed-back system, which screens the unqualified large and small particulate materials, conveys them through belt hoist, re-crushes them and sends them to the granulator to continue granulating, which is helpful to improve the continuous operation ability of the production line.

Vibration Screener Machine: It has better screening effect for materials, but it has more dust than rotary drum screening machine at work.

How to choose fertilizer manufacturing process plant

fertilizer granulator Nov 12, 2019

Fertilizer promotes the development of ecological agriculture, and the demand is huge. Investment in building fertilizer plants has become a popular project. Some investors want to build small-scale fertilizer manufacturing process to save costs, while some investors in fertilizer plants are going to build large-scale fertilizer plants to save unit production costs.

So what should we pay attention to when purchasing fertilizer manufacturing process plant? Here are some notes.

1. Determine the type of fertilizer and producton site. Determining whether to produce organic fertilizer or compound fertilizer affects the choice of site. If organic fertilizer is produced, it should not be too far from the farm where raw materials are provided. The type of fertilizer determines whether compound fertilizer equipment or organic fertilizer equipment is needed. Different types of fertilizer equipment also have differences.

2. Determine the fertilizer granulator machine. Granulation is the key link in fertilizer production and plays an important role in the quality of manufactured fertilizer. Fertilizer granules are cylindrical, spherical and flat spherical in shape. The granules produced by granulators of different shapes are different. The choice of granulator is related to the scale of fertilizer plant construction and local market. Fertilizer factories have different investment scales, different production processes, and different supporting equipment.

If a small fertilizer plant is to be built, it is suggested to configure simple machinery and equipment to reduce investment in equipment. The small fertilizer production line is composed of crusher, mixer, granulator, drum screener and automatic packing machine. If organic fertilizer fermentation is needed, it can be carried out with batten fermentation and windrow turning machine. The advantages are that they are more in line with the principle of aerobic fermentation. It is not easy to form anaerobic fermentation. The fermentation is full and complete, and the fermentation speed is fast. Forklift trucks can also be used instead of turner (the effect is not as good as turner), which can be adopted in terms of saving investment. According to the local environmental protection requirements, choose dust removal settings, where environmental protection requirements are high, choose heavy dust settings to meet the local emission quality standards.

Investment in large and medium-sized fertilizer plants, fertilizer production equipment can choose turning machine, automatic batching system, loader feeding hopper, crusher, mixer, granulator, dryer, hot stove, cooler, feeder, screener, cyclone dust collector, packing machine, etc. Increase mechanical automation, save manpower and cost. Organic fertilizer tank fermentation, can choose simple compost turning machine, double screws compost turning machine (suitable for large yield).

3. Determine the manufacturer of fertilizer manufacturing process plant. Several fertilizer machine manufacturers were inspected, and the strength, scale and reputation of the manufacturer of fertilizer equipment were fully understood. It is better to inspect the production workshop, finishing workshop and assembly workshop of the enterprise, to know the product quality, processing equipment, production process of the enterprise, and whether the fertilizer equipment produced by the manufacturer is professional. Referring to the customer cases that the manufacturer has completed, on-site test machine, the production site can best show the real operation of the equipment. Looking for fertilizer equipment suppliers with perfect after-sales service, suppliers provide professional technicians to guide customers to install and debug equipment, so that the equipment can operate normally, and provide corresponding training services.

4. Determine the safety performance of fertilizer manufacturing process plant. Safety is the first, before purchasing, we need to consider whether the production line has safety devices, whether the machine design is reasonable, whether safety factors are taken into account, whether the parts are not welded properly, whether the bolts are tightened, whether there is pollution, and so on. In addition, whether the overall operation of the equipment is smooth and whether the design of the production line is reasonable are also matters needing attention, because it relates to the efficiency and quality of the operation of the equipment. With the permission of the manufacturer, the operator can try to operate it in practice and feel its state conveniently.

Powerful organic fertilizer production equipment enterprises can customize their own equipment configurations for different customers according to their needs, and users can choose their own equipment according to their own needs. Zhengzhou Tianci Heavy Industry Machinery Co., Ltd. We provide customers with process design, equipment manufacturing, installation and commissioning, with full one-stop services. We are a leading agricultural equipment manufacturer in China, has strong technical strength in fertilizer machines. We have exported to many countries, India, Korea, Vietnam, Pakistan, Malaysia, Kenya, Sudan, Egypt, Algeria, Russia, Ukraine, Turkey, Spain, etc. Any question, welcome to contact us.

How to Operate Cow Manure Organic Fertilizer Manufacturing Process

fertilizer granulator Nov 12, 2019

How to deal with cow dung in cattle farm? In the process of cattle breeding, if the cow dung is not handled in time, it will cause air pollution, breed a large number of mosquitoes and flies, pollute the surrounding environment of the farm and cause cattle diseases. Treating cow dung to turn waste into treasure can also bring huge benefits.

Making cow dung into organic manure is one of the main methods to treat cow dung. Dry cow dung contains 10%-20% crude protein, 1%-3% crude fat, 20%-30% nitrogen-free extract and 15%-30% crude fiber, so it has high nutrients. An organic fertilizer production line can efficiently convert cow dung into organic fertilizer.

Cow Dung Organic Fertilizer Production Equipment and Process Step

1.Fermentation is the first important step

The cow dung produced by a cow in one year requires 4 to 6 cubic meters of space. According to the scale of farming, reasonable construction of cattle dung accumulation fermentation site. Adding 10%-15% straw, rice bran and other supplementary materials to cow dung, and adding appropriate water, the water content of cow dung can be controlled at about 60%, inoculated with starter, and the fermentation time is 15-40 days (depending on the season).

In organic fertilizer fermentation, turning is an important phase. Its purpose is to enable the materials mixed. By the thrown over, it course of the materials make the most contact with the air and get the best fermentation.

Fermentation compost turning machine (Strong maneuverability of mechanical dump operation)

Trough Compost Turning Machine, Double Screws Compost Turning Machine(Suitable for large field flip), Windrow Compost Turning Machine(Suitable for strip stacking).

2.Crushing raw material

The fermented materials and other additives are crushed, proportioned and mixed through material grinder and mixer in a certain proportion. The function of this system is to crush, mix and mix compost materials, inorganic fertilizers of nitrogen, phosphorus, potassium and other additives in a certain proportion. Based on years of experience, the following equipment is recommended:

Half-wet Material Crusher

The machine is mainly used to crush materials of biological fermentation organic fertilizer with moisture of 25%~50%. Have good effect on grinding the glass brick, ceramics and broken stone such kinds of hard matter from the city life garbage organic fertilizer.

Horizontal Mixer

Horizontal mixer stir material in batches, material can be mixed completely. High mixing rate, less residual suitable for feed, concentrated feed, premix additives mixing.

3.Pelletizing

New Type Organic Fertilizer Granulator is used to granulate the material. The organic fertilizer granulator is the newest technology products by our years of research experience. It process fertilizer powder into granules, it also can be achieved the better effect of grain making to acid and municipal sludge.

4.Drying, cooling and screening

After granulating, the fertilizer moisture is a little high. Use organic fertilizer Rotary Dryer, further remove water, to achieve the standard requirements of organic fertilizer moisture content.

Cooling the particulate matter with a Rotary Cooler helps to store the heat particulate matter from the top of the dryer to the counter-flow cooler. Under the action of the cooling fan, the dry air enters from the lower part of the cooler and exchanges sufficiently with the wet and hot particles from the upper tribe and the lower tribe.

There are some differences in particle sizes of the particles exported from the pelletizing and forming system, which requires sieving and grading. Drum Screener Machine has the advantages of low vibration, low noise and convenient screen change. The organic fertilizer manufacturing process is equipped with automatic feed-back system, which screens the unqualified large and small particulate materials, conveys them through belt hoist, re-crushes them and sends them to the granulator to continue granulating, which is helpful to improve the continuous operation ability of the production line.

5.Packing

Packing Machine weighs and packs the particulate matter quantitatively. Automatic quantitative packaging of powder and granules, suitable for flour, starch, feed, food, chemical industry, light industry, building materials industries.

Using cow dung as raw material to produce organic fertilizer has the advantages of low cost, stable quality, fluffy soil, improved land consolidation, improved soil fertility, and great marketing space. As a leading fertilizer equipment manufacturer in China, we have a professional organic fertilizer manufacturing process, which can make cow manure into organic fertilizer with high efficiency and benefit.

The difference between organic fertilizer and chemical fertilizer

fertilizer granulator Nov 12, 2019

Difference between organic fertilizer and chemical fertilizer
Chemical fertilizer, manufactured by chemical or physical methods, containing one or more nutrient elements for crop growth. Also known as inorganic fertilizers, including nitrogen, phosphate, potash, micronutrients, compound fertilizers, etc. It has strong pertinence and quick effect. There are many kinds of chemical fertilizers, the most common ones are urea.

Organic fertilizer is formed by a variety of animal, plant residues or metabolites after a certain processing technology. Mainly including agricultural wastes, livestock manure, industrial wastes, municipal Sludge,etc. Organic fertilizer is rich in nutrients and can improve soil.

Main chemical fertilizer granulator machine:
Double Roller Granulator
Double Roller Granulator has compact structure, good stability, good sealing, low noise, easy operation and maintenance, etc. The new machine has won the users praise after coming into the market. Wide adaptability for raw materials, such as fertilizer, feed, chemical industry and especially good adaptability for rare earth, metallurgy, coal, biologics environmental protection. On the other hand, it is also the promotion of environment projects.

Disc Granulator (Pan Granulator)
Disc granulator is used to make powder into ball shape, widely applied in organic fertilizer plant, fertilizer plant and mines, chemical industry, food and other industries. The machine for processing of granulation, granule product with beautiful appearance, particle diameter selection of large scale.

Rotary Drum Granulator
Drum granulator is a kind of fertilizer granulator machine can make the material into a specific shape. It is suitable for large-scale production of cold &hot fertilizer granulation line and high and low concentration compound fertilizer line.

Main organic fertilizer granulator machine:
New Type Organic Fertilizer Granulator
This organic fertilizer granulator used for granulation all kinds of organic matter after fermentation, crushing through the conventional organic prilling before granulation. The organic content can be high to 100%, make pure organic granulate, granule is round ball.

Ring Die Granulator
The granulator is used for granulation to all kinds of organic matter after fermentation, break through the conventional organic prlling before granulation. no need to dry and crush the raw materials before granulation. It can direct burdening to work out cylindrical grain, and save a lot of energy.

Two In One Organic Fertilizer Granulator
The machine can not only granulate a variety of organic matter, especially for the coarse fiber materials which are difficult to be granulated by conventional equipment, such as crop straw, wine residue, mushroom residue, drug residue, animal dung and so on. And it could granulate compound fertilizer. Organic fertilizer and compound fertilizer can be mixed and granulated.

Why is organic fertilizer so popular
Organic fertilizer can improve the damage, because the organic elements contained in it will restore soil vitality. Excessive use of chemical fertilizer damage the structure of the soil, and cause great harm to the soil.

Organic fertilizer improves plant’s resistance to disease and insect pests, while chemical fertilizer is a single microorganism population, which is prone to plant diseases and insect pests.

Organic fertilizer production equipment main includes: Compost turner machine, Crusher machine, Screen Machine, Mixing machine, Fertilizer granulator, Dryer machine, Cooler machine, Screener machine, Packaging machine.