The digestive tract of chickens is very short, and the nutrients they eat stay in it for a very short time, resulting in a low digestibility and utilization rate of nutrients, usually only 30%. The rest of the body is excreted with feces. It also causes a significant waste of feed nutrition. So chicken manure is rich in high nutrients.
The harmless treatment of chicken manure organic fertilizer production equipment is composed of organic fertilizer fermentation tipping machine, fertilizer crusher, mixer, organic fertilizer granulator, organic fertilizer dryer, cooling machine, screening machine, storage bin, automatic packaging machine, belt conveyor and other equipment. Processing organic materials such as animal manure, straw and rice husks, biogas sludge, kitchen waste, and urban waste into organic fertilizers can not only reduce environmental pollution but also turn waste into treasure..jpg)
The production process of supporting equipment for chicken manure organic fertilizer production line mainly involves using organic solid waste with a moisture content of less than 60%, such as chicken manure, pig manure, cow manure, duck manure, household garbage, rice husks, weeds, straw, etc., as the main raw materials, and mixing them evenly with microbial fermentation agents. Through aerobic continuous fermentation, the organic waste is fully decomposed, sterilized, deodorized, and dehydrated, and fermented and dried until the organic waste with a moisture content of 30-35% is crushed, Perform magnetic separation and screening, and then measure, ingredient, and mix (or further dry to produce powdered organic fertilizer) with the raw materials of binders and other components that need to be mixed according to the ratio requirements in the automated ingredient mixing system. The fully mixed materials are uniformly and continuously fed into the organic fertilizer granulator by a belt conveyor for granulation, and then dried at low temperature and high air volume (≤ 65 ℃) by a dryer before cooling, screening, and The finished particles are coated by a coating machine (with brightening agent and anti caking agent added), transported by a belt conveyor to the finished product silo, measured by a computer automatic quantitative packaging system, and packaged into 40-50kg/bag of finished products. They are then stacked and stored, ultimately producing fertilizer with round particles.