Improve the working efficiency of organic fertilizer crusher
1. The selection of materials is the key. When selecting materials, pay attention to the hardness of materials. The harder the material is, the more difficult the equipment is to crush and wear. The crushing speed is slow and the natural crushing capacity is small.
2. The humidity of the material is the key. When the water content of the material is large, the material is easy to stick in the grinder, but it is also easy to block during the feeding process, thus reducing the crushing capacity. Therefore, the water content should be reduced as much as possible before crushing so that the grinder can operate better.
3. Crushing materials require high fineness, that is, the finer the material, the smaller the crushing capacity.
4. Composition of crushing materials: The more fine powder content in the materials before crushing, the greater the impact on crushing, because these fine particles are easy to adhere and affect transportation. The content of fines shall be pre screened.
5. Viscosity of materials: that is, the greater the viscosity of materials, the easier the bonding.
6. The better the abrasion resistance of the crushing parts (hammers and jaw plates) of the crushing equipment, the stronger the crushing capacity. If they are not abrasion resistant, the crushing capacity will be affected. For example, crushed straw can be made into organic fertilizer, which can destroy farmland and greatly improve the use efficiency based on farmland.