Noise reduction method of organic fertilizer granulator

1. There may be a problem with the bearing of a part of thegranulator, which makes the machine work abnormally, the working current fluctuates, and the working current is high.
2. The annular die is blocked, or part of the die hole is separated from the material. If the annular die gets into foreign matters, the annular die will break away from the circle, the clearance between the roller and the die is too tight, the roller is worn or the roller bearing is damaged and cannot rotate, which will cause the vibration of the granulator.
3. The alignment of the coupling is unbalanced, the height and height have deviations, thegranulatorhas vibration, and the gear shaft oil seal is easy to be damaged.
4. The main shaft is not tightened, especially for D or E machines. The looseness of the main shaft will cause axial movement before and after the movement. The roller swings obviously, and the granulator is noisy and difficult to granulate.
5. The wear of big gear and small gear, or the replacement of single gear, will also produce a lot of noise.
6. The discharge of materials at the outlet of the conditioning device is uneven, which makes the working current of the granulator fluctuate greatly.
7. The new ring die must be used to prepare the new drum, and a certain proportion of sand bran must be used for grinding and polishing.
8. The tail of the hair conditioner is not fixed or fixed, and will not shake.

More and more farmers are looking for ways to produce organic fertilizer as the organic movement continues to grow. While there are many commercial products available, some farmers are choosing to make their own fertilizer using organic production equipment.

There are a few things to keep in mind when using organic fertilizer production equipment. First, it is important to choose the right equipment for your needs. There are a variety of organic fertilizer production systems available, so it is important to select the one that best fits your operation.

Second, it is important to follow the manufacturer’s instructions when using the equipment. This will ensure that you are using the equipment properly and that you are getting the best results.

Finally, it is important to monitor the organic fertilizer production process carefully. This will help you troubleshoot any problems that may arise and make sure that the fertilizer is being produced correctly.