Common Problems with Disc Granulators in Fertilizer Production

fertilizer granulator Sep 5, 2025

Fertilizer granulators are widely used in the fertilizer industry, and disc granulators are particularly common. What are some common problems with disc granulators in fertilizer production? If problems such as material sedimentation and clumping occur during granulator operation, how can you resolve them? Below, we will guide you through resolving these issues.

Precipitation can occur during fertilizer production. Some materials cannot be mixed; when they are mixed and dissolved in water, precipitation occurs. Some fertilizers are soluble in certain proportions, but above a certain concentration, salting out occurs, causing another material to precipitate. Some materials, such as metal salts, are easily soluble in acidic media, but will precipitate. Other materials, such as humic acid, are easily soluble in alkaline media, but will precipitate when dissolved in acidic solutions.

The main methods to prevent precipitation are to properly adjust the pH of the solution, add cosolvents, and increase the solubility of insoluble substances. The raw materials used in NPK fertilizer production lines should be properly proportioned to prevent salting out and oversaturation. Appropriate additives should be added to protect the reaction materials and prevent precipitation. Appropriate raw materials should be selected to prevent precipitation caused by reactions between them.

Bloating in fertilizer production is caused by the release of gas from the reaction of two or more materials. Materials that may cause bloating during fertilizer production include borax, ammonium salts, and fillers. To effectively prevent bloating, the following points should be noted when using a disc granulator to produce pellets: When sourcing qualified raw materials, avoid blindly pursuing low costs; and ensure that raw materials are properly combined to prevent chemical reactions between them.

Clumping in fertilizer production: This problem is primarily related to the raw materials, humidity, temperature, external pressure, and storage time. Organic fertilizer production equipment requires the proper selection of raw materials, meaning those that are less prone to caking.

Key Maintenance Points for Disc Granulators in Organic Fertilizer Production Lines

fertilizer granulator Sep 2, 2025

In organic fertilizer production lines, the disc granulator is the core equipment for raw material processing. Its operating condition directly affects product quality and production efficiency. Scientific maintenance can extend equipment life, reduce downtime, and lower costs. The following details maintenance methods from three perspectives: daily, periodic, and long-term.

Daily maintenance requires “cleaning and inspection in tandem.” After each shutdown, promptly clean the discs of residual material to prevent hardening and scratching of the disc surface or increased operating load. Use soft tools to prevent damage to the liner. Also, check the disc’s tilt angle (normally 45°-55°). If offset, correct it using the bracket bolts. Observe the transmission system daily for abnormal noise and check the motor and reducer temperatures. If the temperature exceeds 60°C, shut down the machine for inspection.

Regular maintenance focuses on “component maintenance and lubrication.” Perform a comprehensive weekly inspection, focusing on the meshing of the transmission gears. Adjust and replace any wear or excessive clearance. Inspect the bearing seals to prevent dust intrusion. Replace the bearing grease monthly. Choose a high-temperature, dust-resistant lithium-based grease, filling it to fill 2/3 of the bearing’s internal space. Disassemble and inspect the scraper blade quarterly. If the blade wear exceeds 3mm, polish or replace it. Ensure a 1-2mm gap between the blade and the liner to prevent material adhesion.

For long-term maintenance, maintain “equipment inspection and record keeping.” Perform a comprehensive annual disassembly and inspection. If the liner thickness decreases by 1/3, replace it entirely. Perform a flaw inspection on the frame to identify any weld cracks and repair them. Maintain a maintenance log, recording maintenance times, details, and replaced parts. Use data analysis to predict failures and plan maintenance in advance.

In short, disc granulator maintenance should adhere to the principle of “prevention first, prevention combined.” This involves combining daily cleaning, regular maintenance, and ongoing inspections to ensure optimal equipment operation and a stable and efficient organic fertilizer production line.

Fertilizer Processing Process with a Disc Granulator

fertilizer granulator Aug 29, 2025

The disc granulator is the core equipment in a fertilizer production line, and its standardized processing flow is crucial for producing high-quality fertilizer.

The first step is raw material preparation. Raw materials include organic materials such as animal manure and plant residues, as well as inorganic materials such as urea and ammonium phosphate. These raw materials must be crushed to reduce particle size for subsequent mixing and granulation. Furthermore, they must be accurately weighed according to the formula to ensure an accurate nutrient ratio, and the humidity must be adjusted to 20%-30% to facilitate granule formation.

The second step is raw material loading. The disc is driven by a motor, and the speed can be set according to the raw material characteristics and the desired particle size. The raw material is evenly distributed on the disc, spread toward the edges due to centrifugal force, and then rises along the inner wall due to friction. After reaching a certain height, it falls back due to gravity, forming a circular motion.
The third step is the application of a binder. As the raw materials circulate, a nozzle above the discsprays the binder onto the raw materials. The binder is usually a natural polymer or inorganic substance. When it comes into contact with water, it develops viscosity, causing the fine particles to bind together. The spraying rate must be precisely controlled: too much will result in oversized and dense granules, while too little will make them difficult to form.

The fourth step is granule growth. As the disc rotates continuously, the already bonded small granules continuously absorb the raw materials, growing larger as they rotate. The collision and friction between the granules also make them more compact. The operator must observe the granule state and adjust the rotation speed and tilt angle promptly. The rotation speed affects the residence time and granule size, while the tilt angle changes the movement trajectory and helps shape the granules.
The fifth step is discharge. When the granules reach the desired size and quality, they overflow from the edge of the disc. Freshly formed granules contain moisture, which requires drying to reduce the moisture content and improve stability and storage performance.

Through this series of rigorous processes, the disc granulator machine transforms various raw materials into high-quality granular fertilizers, providing strong support for agricultural production.

Key Maintenance Points for Disc Granulators in Organic Fertilizer Production Lines

fertilizer granulator Aug 26, 2025

In organic fertilizer production lines, the disc granulator is the core equipment for raw material processing. Its operating condition directly affects product quality and production efficiency. Scientific maintenance can extend equipment life, reduce downtime, and lower costs. The following details maintenance methods from three perspectives: daily, periodic, and long-term.

Daily maintenance requires “cleaning and inspection in tandem.” After each shutdown, promptly clean the discs of residual material to prevent hardening and scratching of the disc surface or increased operating load. Use soft tools to prevent damage to the liner. Also, check the disc’s tilt angle (normally 45°-55°). If offset, correct it using the bracket bolts. Observe the transmission system daily for abnormal noise and check the motor and reducer temperatures. If the temperature exceeds 60°C, shut down the machine for inspection.

Regular maintenance focuses on “component maintenance and lubrication.” Perform a comprehensive weekly inspection, focusing on the meshing of the transmission gears. Adjust and replace any wear or excessive clearance. Inspect the bearing seals to prevent dust intrusion. Replace the bearing grease monthly. Choose a high-temperature, dust-resistant lithium-based grease, filling it to fill 2/3 of the bearing’s internal space. Disassemble and inspect the scraper blade quarterly. If the blade wear exceeds 3mm, polish or replace it. Ensure a 1-2mm gap between the blade and the liner to prevent material adhesion.

For long-term maintenance, maintain “equipment inspection and record keeping.” Perform a comprehensive annual disassembly and inspection. If the liner thickness decreases by 1/3, replace it entirely. Perform a flaw inspection on the frame to identify any weld cracks and repair them. Maintain a maintenance log, recording maintenance times, details, and replaced parts. Use data analysis to predict failures and plan maintenance in advance.

In short, disc granulator maintenance should adhere to the principle of “prevention first, prevention combined.” This involves combining daily cleaning, regular maintenance, and ongoing inspections to ensure optimal equipment operation and a stable and efficient organic fertilizer production line.

The Secrets of the Disc Granulator in an Organic Fertilizer Production Line

fertilizer granulator Aug 25, 2025

At the heart of an organic fertilizer production line, the disc granulator, with its unique operating principle, transforms loose organic raw materials into uniform granules, becoming a key piece of equipment connecting fermentation and finished products. While its seemingly simple operation requires precise control of material properties and mechanical movement, the disc granulator’s core structure consists of a tilted circular disc, the angle of which can be adjusted according to the characteristics of the raw materials. When fermented and pulverized organic materials (such as a mixture of livestock and poultry manure and straw) are fed into the disc, the disc rotates at a constant speed, causing the materials to slide upward along the disc wall under the combined effects of centrifugal force, friction, and gravity. Once they reach a certain height, they fall due to gravity, forming a continuous material circulation.

The key to the granulation process lies in the proper ratio of water to material. As the disc rotates, a spray system evenly applies an appropriate amount of water to the material, forming a moist film on the surface of the organic granules. As the materials collide and squeeze each other during this circulation, the moistened surfaces of the granules attract surrounding fine particles, gradually expanding like a snowball. The operator monitors the granulation process and adjusts the water spray rate and disc speed in real time to ensure uniform particle size.

The disc granulator‘s advantage lies in its adaptability to organic materials. Organic fertilizer raw materials are complex and high in fiber. The gentle rotation of the disc reduces material loss while preserving the activity of beneficial microorganisms. For materials with high humidity, the disc’s tilt angle can be adjusted to reduce the material’s residence time within the disc, preventing sticking and clumping. For dry materials, the disc’s rotation speed can be slowed to prolong agglomeration.

Organic fertilizer granules processed by the disc granulator are not only easy to store and transport, but also enable a slow release of nutrients upon application. With its simple and efficient design, this equipment bridges the gap between raw materials and finished product in the industrial production of organic fertilizer, providing solid technical support for the large-scale development of organic agriculture.

Factors Affecting the Production of Compound Fertilizers Using a Disc Granulator

fertilizer granulator Aug 21, 2025

When producing compound fertilizers using a disc granulator, many factors influence granulation, such as disc diameter, disc speed, disc inclination, nozzle aperture, and moisture content. Generally speaking, disc inclination has a greater impact on the granulation rate, while disc speed has a greater influence on the compressive strength of the granules.

The moisture content of disc granulation significantly influences both the granulation rate and the compressive strength of the granules. When the moisture content of the material is controlled within the range of 16%-20%, the granulation rate and compressive strength of the granules are optimal. Too little moisture results in a low granulation rate; too much moisture causes the material to clump and stick together, resulting in a reduced granulation rate. When the moisture content is too low, the compressive strength of the granules increases with increasing moisture content, which is beneficial for improving the compressive strength of the granules. However, when the moisture content is too high, the excess moisture disrupts the interactions between fertilizer molecules, causing the dried granules to crack and resulting in a decrease in compressive strength. Before using a disc granulator, the optimal moisture content, disc speed, and disc inclination angle should be tested to ensure high fertilizer production line efficiency and high pellet quality. Furthermore, the finer the raw material powder, the better the granulation effect.

Disc granulators are widely used in organic fertilizer production lines and compound fertilizer production lines. Fertilizer production using disc granulators offers low investment, high output, simple process, and intuitive operation, resulting in excellent economic and social benefits.

Application of Disc Granulators in NPK Fertilizer Production Lines

fertilizer granulator Aug 20, 2025

In the NPK fertilizer production line, disc granulators are a widely used and highly favored granulation equipment.

The disc granulator‘s structure is relatively simple yet unique. It primarily consists of an inclined disc, a drive mechanism, and a spray system. The disc, the core of the granulation process, is typically constructed of high-strength steel to ensure it can withstand the various forces involved in the granulation process. The drive mechanism provides stable rotational power to the disc, ensuring it rotates at an appropriate speed.

The disc’s operating principle is based on the movement and interaction of the materials within the rotating disc. When the mixed NPK fertilizer raw materials are fed into the rotating disc, the disc’s tilt and rotational motion cause the materials to roll upward along the disc’s inner wall due to a combination of centrifugal force, friction, and gravity. During this rolling process, a spray system applies a binder to the material. The binder acts like “glue,” gradually binding the loose raw material particles together and causing them to aggregate and grow. Over time, these agglomerated particles continuously roll and collide within the disc, further compacting and shaping them, ultimately forming relatively uniformly sized round granules that roll off the disc’s edge, completing the granulation process.

Disc granulators offer numerous advantages. First, they produce fertilizer granules with high roundness, excellent appearance, and strong market competitiveness. Second, they are relatively simple to operate and easy to master, requiring minimal operator skill. Furthermore, disc granulators are highly adaptable and can produce fertilizer granules of varying sizes to meet diverse market demands by adjusting parameters such as disc speed, tilt angle, and binder spraying rate to meet specific production needs.

However, disc granulators also have limitations. For example, compared to some large-scale granulation equipment, their production efficiency may be relatively low, making them less suitable for large-scale industrial production. Furthermore, when processing high-viscosity raw materials, material may stick to the disc, affecting granulation efficiency and equipment operation. Nevertheless, due to their unique advantages, disc granulators still play an important role in the production of NPK compound fertilizers by small and medium-sized enterprises, as well as in production scenarios where the appearance of fertilizer granules is a high priority.

How to adjust the conveying capacity of the belt conveyor

fertilizer granulator Aug 19, 2025

Adjusting the conveying capacity of the belt conveyor can be achieved through the following methods:

1. Adjust the motor speed: Adjusting the motor speed is one of the common methods to change the conveying capacity of the belt conveyor. The frequency converter can accurately control the motor speed, thereby adjusting the conveying speed.

2. Adjust the drive roller diameter: Replacing the drive roller can significantly change the conveying speed, but the cost is high, the replacement process is more complicated, and professional personnel are required to operate.

3. Adjust the belt tension: By changing the tension of the belt, the friction between the belt and the drive roller is affected, thereby adjusting the conveying speed. Appropriately increasing the tension can increase the friction and speed up the conveying speed.

4. Adjust the feed rate: By adjusting the opening size of the feed hopper or the feed speed, the amount of material entering the conveyor belt can be controlled, thereby adjusting the conveying capacity. Use an adjustable roller assembly The rollers in the adjustable roller assembly can be set at an angle, and the material gathers in the middle of the conveyor belt to prevent spillage.

5. Automatic control: Use the coal inspection modules set at intervals to determine the amount of coal transported on the belt conveyor, so as to accurately control the speed of the previous belt conveyor. At the same time, use the speed sensor to collect whether the speed of the previous belt conveyor after speed regulation is accurately adjusted. In abnormal cases, use the anti-slip protection device to terminate the operation of the belt conveyor, realize the function of controlling the speed of the belt conveyor according to the amount of coal, and reasonably consume electricity and material resources.

Through the above methods, the conveying capacity of the belt conveyor can be effectively adjusted to meet the production needs of different organic fertilizer production lines.

Selection skills of disc granulator fertilizer production equipment

fertilizer granulator Sep 15, 2020

Although the disc granulator machine has a slightly smaller output than the rotary drum granulator, it is still the main equipment for compound fertilizer production, and the fertilizer granules produced have a smooth appearance. Therefore, many companies have retained disc granulators in organic fertilizer production. Now that the disc pan granulator is still in use, what are some tips when choosing disc granulation equipment?

1. When choosing equipment, don’t be greedy for cheap, buy some equipment from small manufacturers. Although it was cheap at the time, it is easy to have problems such as this in the future use, which delays normal production. Not worth it.

2. When choosing a device, you must first choose a regular manufacturer. This is the most important, because even if there is a problem with our device in the future, we can find them and solve the problem. Our company’s consistent style is to provide follow-up guarantee services, so no matter what the customer has in the equipment we produce, we will seriously solve the problem until the customer’s problem is solved.

3. Pay attention to the quality of the equipment when purchasing the equipment. When selecting the organic fertilizer production line, we must go to the manufacturer to inspect it. During the inspection process, we should have a general understanding of the strength of the company and the quality of the equipment produced Wait.

Some precautions when using the disc granulator machine:

1. The disc granulating equipment should be checked between productions to see if the inside of the granulating disc is empty. In addition, the machine should be preheated before production.
2. Pay attention to changes in production temperature at any time during the production process and adjust in time.
3. Attention must be paid to the production of disc granulation equipment. Check whether the direction of disc rotation is reversed. If it is reversed, stop immediately to avoid other problems.
4. In fact, the equipment is the same as that of human beings, and they need to be checked and cleaned regularly. After a period of production, relevant staff must be arranged to check the machinery.

Supply efficient disc NPK fertilizer granulator machine

fertilizer granulator Sep 12, 2020

Disc granulator machine can be used in the high-efficiency NPK fertilizer production line of 5 tons per hour, which is suitable for the production of organic fertilizer and compound fertilizer. The disc pan granulator adopts arc disc angle structure, the granulation rate can reach more than 90%, the product particles are uniform, the machine runs smoothly, and the service life is long. Disc granulation machine is one of the granulators for NPK compound fertilizer production.

In the compound fertilizers production with different processes, the granular fertilizers with round appearance, gloss, uniform particle size, compact internal structure, uniform nutrient mixing and high strength are required not only to have finer materials and higher mixing degree, but also to have appropriate technological parameters and reasonable operating conditions.

As various fertilizer machine manufacturers, we supply organic fertilizer production equipment, compound fertilizer machinery, and different types of disc granulators. Disc fertilizer granulator varies with inner diameter, side height and rotational speed. According to the production conditions, combined with the plant budget, customers can choose their favorite production line to put into production. Our disc fertilizer granulator is your ideal NPK compound fertilizer granulator machine.

Production Characteristics of Disc Granulator Machine

Disc granulation machine is an important part of fertilizer manufacturing. Granular fertilizer is easy to transport and store. It has the characteristics of uniform granules and high granulation rate. In the process of fertilizer granulation, with the increase of inorganic fertilizer, the water content of fertilizer decreases when it is granulated. Appropriately shortening the granulation time can improve the granulation effect. The longer the granulation time is, the bigger the particle diameter is and the worse the effect is.

1.The granulator has three discharge ports, which facilitates intermittent production, greatly reduces labor intensity and improves labor efficiency.

2.The motor and speed reducer are driven by flexible belt to ensure smooth start and improve the service life of the equipment; the gear is quenched by high frequency, and the service life is doubled.

3.The disc is made of high-strength glass fiber reinforced machine inner lining, the machine is corrosion-resistant and has a long service life; the bottom of the disc is reinforced with multiple radiant steel plates, which is durable and never deformed.