As a general organic fertilizer production, the steps mainly include crushing, fermentation, granulation, drying, and other steps. However, if you want to meet the local needs, you need to add a certain amount of N, P, K, and other composite fertilizers, then mix and stir evenly, and use physical extrusion to make particles.
The inorganic fertilizer composite fertilizer extrusion granulator is produced using a non drying room temperature process, with a production capacity of 1-1.5 tons/hour, 1.5-3 tons/hour, and other specifications. It can produce various concentrations and types of compound fertilizers (including organic fertilizers, inorganic fertilizers, biological fertilizers, magnetized fertilizers, etc.). This equipment has low investment and good economic benefits. The complete equipment layout is compact, scientific and reasonable, energy-saving and consumption reducing, stable operation, reliable operation, and convenient maintenance..jpg)
The working principle of the inorganic fertilizer composite fertilizer extrusion granulator is that the belt pulley is driven by an electric motor, and the transmission belt is transmitted to a pair of high-pressure roller bodies with sliding mold shells through a reducer for relative work.
The two rollers of the inorganic fertilizer compound fertilizer extrusion granulator are interacted with each other by a set of opposing gears. The two rollers of the extrusion granulator are directly driven by two output shafts on a dedicated reducer to achieve the purpose of extrusion molding. During production, the raw materials enter the feed hopper and are relatively extruded by the high-pressure roller body. After demolding, they flow to the lower part of the roller body for crushing and forming.