In fertilizer production, high-moisture raw materials (such as fermented organic fertilizers and wet materials after compound fertilizer granulation) are prone to caking and mold if not dried promptly, affecting product quality and storage life. Drum fertilizer dryers, with their “continuous drying + uniform heating” characteristics, have become a core dehydration equipment in the fertilizer industry. Their operating principle is precisely adapted to the characteristics of fertilizer raw materials.
The core structure of a drum fertilizer dryer is an inclined rotating drum equipped with a heating system and a discharge device. During operation, high-moisture fertilizer (30%-50% moisture content) enters the drum through the high-end feed port. The motor drives the drum to slowly rotate, continuously turning the material and moving it forward. Simultaneously, the high-temperature hot air generated by the heating system fully contacts the material, rapidly removing moisture from the material through a dual heat transfer process of “convection and conduction.”
To prevent fertilizer clumping, a lifting plate is often installed inside the drum. This plate continuously lifts and drops the material, increasing the heating surface and ensuring uniform drying of each portion. The drum’s tilt angle is adjustable to control the material’s residence time within the drum, thereby precisely controlling the moisture content after drying. The entire process is continuous and stable, suitable for the mass production needs of organic fertilizer production lines. The dried material is loose and free of lumps, eliminating the need for secondary crushing.